bing tracking image

Honda Pilot Tow Bar Wiring Installation And Review Videos

     

Blue Ox Tail Light Wiring Kit Installation - 2011 Honda Pilot- Video

Blue Ox Tail Light Wiring Kit Installation - 2011 Honda Pilot

Today on our 2011 Honda Pilot, we're going to be installing the Blue Ox Bulb and Socket Taillight wiring kit, part number BX8869. Here's the Blue Ox kit when you pull it out of the box. We're going to have our 25' of wire that takes us up to the front of the car. We'll be able to connect our 4-pole or 6-pole wiring harness right to that. We'll have our ring terminals and our self-tapping screws for our grounds. We'll have the wires that we'll need to run from the passenger's side over to the driver's side and hook everything together and an assortment of butt connectors there that will help us do that. more


Watch Video

5/1/2015 1:01:06 PM



Blue Ox Fuse ByPass Switch Installation - 2011 Honda Pilot- Video

Blue Ox Fuse ByPass Switch Installation - 2011 Honda Pilot

Today on our 2011 Honda Pilot we're going to be installing the Blue Ox Fuse ByPass Switch for Towed Vehicles, part number BX88271. We're going to have our switch, that's going to allow us to turn that fuse or that circuit on and off. It's going to allow us a couple of things. We can use this if we want to turn off a battery drain source into inside our vehicle when we're going our flat tow, instead of having to go in there and pull that fuse each time. All we'll have to do is flip our switch to the off position. It'll open up that circuit so we won't have to worry about a battery drain. Another very important thing, especially as we're towing a vehicle behind, sometimes it's accumulating miles. more


Watch Video

4/28/2015 5:06:55 PM



  1